Gass kamera

Antall produkter: 9




FLIR GF309 Gasskamera (24° linse)

FLIR GF309 is equipped with a special midwave “flame filter” engineered to see in the high temperatures (up to 1,500˚C) encountered during industrial furnace and boiler inspections. A nickel-coated heat shield improves worker safety and comfort during inspection.Add the furnace IR 14.5-degree lens extender to measure the temperature of furnace tubes and ovens through small view ports.

Furnace Inspection – The GF-309 gives inspectors clear thermal imagery of fired product tubes, allowing them to distinguish between internal coking and external scaling, helping to avoid costly tube overheat failures. The ability to identify coking also allows for proper planning of unit shutdowns and de-coke procedures. 

Burner Alignment – With the GF-309’s specialized filters, inspectors can accurately scan for proper burner alignment and check for flame impingement, identifying if the flame pattern is causing localized tube overheating.

Fire Box Inspection – Its wide temperature range makes the GF-309 well-suited for external firebox inspections, detecting the hot spots on the outside of a firebox that indicate a problem with the internal refractory bricks or insulating blankets.

Coal-Fired Boilers – The GF-309 is ideal for identifying slag buildup that can potentially interfere with heat transfer, cause localized tube corrosion, and result in catastrophic mechanical failure when the slag “clinkers” fall.

Les mer

FLIR GF309 Gasskamera (24° linse)

EAN: 5706445880904

E-NR: 8024344

På lager Lav lagerbeholdning Ikke på lager

RING FOR PRIS +47 22 10 42 70


Opprett ny liste
FLIR GFx320 Gasskamera  (24° linse)

The GFx320 detect methane emissions from the production, transportation, and use of oil and natural gas. They allow you to survey large areas up to nine-times faster than with traditional gas sniffer methods. These OGI cameras also offer highly accurate temperature measurements, so inspectors can assess and improve thermal contrast between the gas cloud and the background.

• Methane
• Methanol
• Propane
• Benzene
• Ethane
• Propylene
• Ethanol
• Pentane
• 1-Pentene
• Isoprene
• Butane
• Ethylbenzene
• Toluene
• Octane
• Heptane
• Xylene
• Ethylene
• Hexane

The FLIR GFx320 allows you to quickly detect and visualize fugitive natural gas emissions while maintaining safety inside hazardous locations. This Intrinsically Safe OGI camera is third-party certified for use in Class I Div II safety areas. The GFx320 is verified to meet sensitivity standards defined in the US EPA’s OOOOa methane rule and meets reporting requirements by tagging each recording with GPS data. By finding leaks and fixing them quickly, your company can protect the environment while avoiding product losses and the cost of regulatory fines.

At offshore rigs, well sites, and production plants, there’s often a risk of gas collecting and igniting with a stray spark or hot surface. Working in these areas requires special clothing and equipment – if it’s possible at all. The oil and gas industry has long awaited a gas detection
solution such as the GFx320, because its Intrinsically Safe designation allows the user to work confidently and focus on the job at hand.

The GFx320 has the following certifications:
ATEX/IECEx, Ex ic nC op is IIC T4 Gc II 3 G
ANSI/ISA-12.12.01-2013, Class I Division 2
CSA 22.2 No. 213, Class 1 Division 2

Les mer

FLIR GFx320 Gasskamera (24° linse)

EAN: 7332558012567


På lager Lav lagerbeholdning Ikke på lager

RING FOR PRIS +47 22 10 42 70


Opprett ny liste
Elma Instruments bruker cookies for å gi deg den beste service. Hvis du fortsetter å bruke våre tjenester, forutsetter det, at du godkjenner bruken av disse cookies. Les mer om cookies, og beskyttelse av personlige opplysninger her. >>>>